Product Library / Indoor Air & Comfort
Research profile · last verified 2026-10-08Compatibility at a glance
Choose your platform to see its setup and functions. Your choice carries across product pages.
A connection can work while individual controls or automations remain unconfirmed. Read the connection details ↓
Protocols: WIFI · BLUETOOTH · MATTER[1][2][3][10][11][33]
Before you buy
SwitchBot's own page answers this twice and the two answers conflict, so both are recorded. The headline says 'Matter-enabled for direct control through Alexa, Apple Home (HomeKit), Google Home and Home Assistant' — direct control, no hub named. An asterisked footnote on the same page then says '(*Matter support requires SwitchBot Hub)'. The machine's own Matter certificate records its transport as Wi-Fi and Bluetooth, which is the configuration of a device that does NOT need a vendor bridge to be commissioned. So the certification and the headline point one way, the vendor's own footnote points the other, and this record does not choose between them: plan for needing a SwitchBot Hub, because that is what the vendor's most specific statement says, and treat the 'direct control' phrasing as marketing until SwitchBot publishes a setup guide that resolves it. A separate hub dependency is stated plainly and is not in dispute: 'Auto Mode (*with SwitchBot Meter/Hub) maintains your preset humidity level' — the automatic humidity-holding mode needs a SwitchBot sensor or hub regardless of how you connect the machine.[2][3][32][33]
Follow the recorded connection below. Equipment details and setup limits explain what else this path needs.
SwitchBot Evaporative Humidifier
What you gainUse the recorded platform connection.
Keep in mindCheck the function table for supported controls and routines. A connection diagram does not establish every function or remote access.
This shows the connection route, not every network cable or a shopping list. One device may provide several roles, including a Matter controller and a Thread border router. Only a Thread connection needs the Thread role. Read the equipment cards for all recorded requirements.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
The equipment list for this platform is not fully specified here. Use the documented setup above; an empty list does not mean no equipment is needed.
Follow the recorded connection below. Equipment details and setup limits explain what else this path needs.
SwitchBot Evaporative Humidifier
What you gainUse the recorded platform connection.
Keep in mindCheck the function table for supported controls and routines. A connection diagram does not establish every function or remote access.
This shows the connection route, not every network cable or a shopping list. One device may provide several roles, including a Matter controller and a Thread border router. Only a Thread connection needs the Thread role. Read the equipment cards for all recorded requirements.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Google Home — Matter path · checked 2026-09-11
Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
Follow the recorded connection below. Equipment details and setup limits explain what else this path needs.
SwitchBot Evaporative Humidifier
What you gainUse the recorded platform connection.
Keep in mindCheck the function table for supported controls and routines. A connection diagram does not establish every function or remote access.
This shows the connection route, not every network cable or a shopping list. One device may provide several roles, including a Matter controller and a Thread border router. Only a Thread connection needs the Thread role. Read the equipment cards for all recorded requirements.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Alexa — Matter path · checked 2026-09-11
Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
Follow the recorded connection below. Equipment details and setup limits explain what else this path needs.
SwitchBot Evaporative Humidifier
What you gainUse the recorded platform connection.
Keep in mindCheck the function table for supported controls and routines. A connection diagram does not establish every function or remote access.
This shows the connection route, not every network cable or a shopping list. One device may provide several roles, including a Matter controller and a Thread border router. Only a Thread connection needs the Thread role. Read the equipment cards for all recorded requirements.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
SmartThings — Matter path · checked 2026-10-14
SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.[2][30]
Compare the documented setups and their requirements. Read each limit before choosing a route.
SwitchBot Evaporative Humidifier
What you gainConnect without routing control through the vendor cloud.
Keep in mindHome Assistant needs working Bluetooth within range. Check the setup notes and function table for this device.
SwitchBot Evaporative Humidifier
What you gainUse Home Assistant’s separate SwitchBot cloud integration.
Keep in mindRequires the cloud setup and credentials described below. It depends on internet; functions may differ from Bluetooth.
Check the function table and setup notes for this route. An alternative connection does not inherit every capability of the recorded primary connection. A Thread border router, a Matter controller and a platform home hub are different roles; suitable hardware may provide more than one.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
The fullest control you can get over this machine, and the one that shows exactly what Matter is costing everyone else. Home Assistant ships two official integrations covering it. The Bluetooth one is rated Gold, runs entirely on your own network — Home Assistant states it 'connects locally to the devices without going via the SwitchBot Cloud' — and lists the Evaporative Humidifier as supported with on/off, mode, AND humidity settings. Home Assistant adds that some of its modes only work once a SwitchBot temperature and humidity sensor is bound to it. That last item is the whole story: the local Bluetooth path gives you the humidity control that the Matter path structurally cannot, because Matter sees this machine as a fan. A Home Assistant user therefore gets MORE control of this humidifier than an Apple Home, Alexa or Google Home user does, with no SwitchBot account at all. The other integration works through SwitchBot's servers and needs a key from the SwitchBot app under Profiles > Preferences > About > Developer Options; it also lists the Evaporative Humidifier. Documented limits on that route: SwitchBot caps it at '10,000 requests per day', and accepts only one notification address.[5][6][26][27][35][36]
SwitchBot's own footnote states '(*Matter support requires SwitchBot Hub)', which conflicts with the same page's 'direct control' headline and with the certificate's Wi-Fi/Bluetooth transport. Recorded as optional rather than required because the conflict is unresolved and hubRequired explains it in full — this catalogue does not convert a contradiction into a requirement without a vendor statement that settles it. Separately, Auto Mode's humidity-holding behaviour requires a SwitchBot Meter or Hub by the vendor's own footnote.[2][3][32][33]
One device can provide more than one role. These are setup requirements, not a shopping list of separate purchases.
What could you do with this?
Start with a documented control or event. The selected connection shows what is confirmed for that platform.
Apple Home · Works, except fan mode
This device supports on/off.
Setup: See the equipment information above.
Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Apple Home — Matter path · checked 2026-09-04
Apple Home · Works, except fan mode
This device reports humidity reading.
Setup: See the equipment information above.
Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Apple Home — Matter path · checked 2026-09-04
Apple Home — Matter path · checked 2026-10-03
Apple Home · Works, except fan mode
This device reports temperature reading.
Setup: See the equipment information above.
Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Apple Home — Matter path · checked 2026-09-04
Apple Home — Matter path · checked 2026-10-03
Google Home · Works
This device supports on/off.
Setup: a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV)
a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV). Google Home — Matter path · checked 2026-09-11
Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Google Home — Matter path · checked 2026-10-03
Google Home · Works
This device supports fan mode.
Setup: a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV)
a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV). Google Home — Matter path · checked 2026-09-11
Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Google Home — Matter path · checked 2026-10-03
Google Home · Works
This device reports humidity reading.
Setup: a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV)
a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV). Google Home — Matter path · checked 2026-09-11
Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Google Home — Matter path · checked 2026-10-03
Alexa · Works
This device supports on/off.
Setup: a Matter-capable Amazon Echo or eero device
a Matter-capable Amazon Echo or eero device. Alexa — Matter path · checked 2026-09-11
Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Alexa — Matter path · checked 2026-09-04
Alexa · Works
This device supports fan mode.
Setup: a Matter-capable Amazon Echo or eero device
a Matter-capable Amazon Echo or eero device. Alexa — Matter path · checked 2026-09-11
Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Alexa — Matter path · checked 2026-09-04
Alexa · Works
This device reports humidity reading.
Setup: a Matter-capable Amazon Echo or eero device
a Matter-capable Amazon Echo or eero device. Alexa — Matter path · checked 2026-09-11
Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [3] [4] [32] [33]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Alexa — Matter path · checked 2026-09-04
SmartThings · Works
This device supports on/off.
Setup: a Matter-compatible SmartThings hub
a Matter-compatible SmartThings hub. SmartThings — Matter path · checked 2026-10-14
SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [30]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-07
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
SmartThings — Matter path · checked 2026-10-07
SmartThings · Works
This device supports fan mode.
Setup: a Matter-compatible SmartThings hub
a Matter-compatible SmartThings hub. SmartThings — Matter path · checked 2026-10-14
SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [30]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-07
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
SmartThings — Matter path · checked 2026-10-07
SmartThings · Works
This device reports humidity reading.
Setup: a Matter-compatible SmartThings hub
a Matter-compatible SmartThings hub. SmartThings — Matter path · checked 2026-10-14
SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.
Connection documentation: [2] [30]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-10-07
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
SmartThings — Matter path · checked 2026-10-07
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
Home Assistant · Works
This device supports on/off.
Setup: See the equipment information above.
The fullest control you can get over this machine, and the one that shows exactly what Matter is costing everyone else. Home Assistant ships two official integrations covering it. The Bluetooth one is rated Gold, runs entirely on your own network — Home Assistant states it 'connects locally to the devices without going via the SwitchBot Cloud' — and lists the Evaporative Humidifier as supported with on/off, mode, AND humidity settings. Home Assistant adds that some of its modes only work once a SwitchBot temperature and humidity sensor is bound to it. That last item is the whole story: the local Bluetooth path gives you the humidity control that the Matter path structurally cannot, because Matter sees this machine as a fan. A Home Assistant user therefore gets MORE control of this humidifier than an Apple Home, Alexa or Google Home user does, with no SwitchBot account at all. The other integration works through SwitchBot's servers and needs a key from the SwitchBot app under Profiles > Preferences > About > Developer Options; it also lists the Evaporative Humidifier. Documented limits on that route: SwitchBot caps it at '10,000 requests per day', and accepts only one notification address.
Connection documentation: [5] [6] [26] [27] [35] [36]
Device documentation: [2] [3] [4] [5] [33] [35]
us.switch-bot.com · checked 2026-08-02
csa-iot.org · checked 2026-10-08
home-assistant.io · checked 2026-10-08
home-assistant.io · checked 2026-10-08
A documented control or event is one part of a setup. It does not by itself establish a complete automation.
A platform connection does not confirm every function. Controls and reported events are shown separately from what an automation can use.
Compare all five platforms. On a narrow screen, scroll the table sideways.
| Device function | Apple HomeWorks, except fan mode[2][3][4][32][33] | Google HomeWorks[2][3][4][32][33] | AlexaWorks[2][3][4][32][33] | SmartThingsWorks[2][30] | Home AssistantWorks[5][6][26][27][35][36] |
|---|---|---|---|---|---|
| On/offDevice control | Control Supported for this Matter device type Automation ✓ routines can use it | Control Supported for this Matter device type Automation ✓ routines can use it | Control Supported for this Matter device type Automation ? not stated | Control Supported for this Matter device type Automation ✓ routines can use it | Control Not stated Automation — |
| Fan modeDevice control | Control Not supported for this Matter device type Automation — Apple Home lists the capabilities its automations can use over Matter, and Fan mode is not on it. | Control Supported for this Matter device type Automation ✓ routines can use it | Control Supported for this Matter device type Automation ? not stated | Control Supported for this Matter device type Automation ✓ routines can use it | Control Not stated Automation — |
| Humidity readingReported event | Event Supported for this Matter device type Automation ✓ routines can use it | Event Supported for this Matter device type Automation ✓ routines can use it | Event Supported for this Matter device type Automation ? not stated | Event Supported for this Matter device type Automation ✓ routines can use it | Event Not stated Automation — |
| Temperature readingReported event | Event Supported for this Matter device type Automation ✓ routines can use it | Event Supported for this Matter device type Automation ✓ routines can use it | Event Supported for this Matter device type Automation ? not stated | Event Supported for this Matter device type Automation ✓ routines can use it | Event Not stated Automation — |
✓ Documented for this connection. × A stated limit. ◐ A partial function. ? Not established. A listed device function does not establish a complete routine, its other equipment or any plan requirements.
Matter device-type support is based on the platform’s list for this kind of device; this exact model is not named.
Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
Fan mode automation: Apple Home lists the capabilities its automations can use over Matter, and Fan mode is not on it.
Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.[2][3][4][32][33]
SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.[2][30]
The fullest control you can get over this machine, and the one that shows exactly what Matter is costing everyone else. Home Assistant ships two official integrations covering it. The Bluetooth one is rated Gold, runs entirely on your own network — Home Assistant states it 'connects locally to the devices without going via the SwitchBot Cloud' — and lists the Evaporative Humidifier as supported with on/off, mode, AND humidity settings. Home Assistant adds that some of its modes only work once a SwitchBot temperature and humidity sensor is bound to it. That last item is the whole story: the local Bluetooth path gives you the humidity control that the Matter path structurally cannot, because Matter sees this machine as a fan. A Home Assistant user therefore gets MORE control of this humidifier than an Apple Home, Alexa or Google Home user does, with no SwitchBot account at all. The other integration works through SwitchBot's servers and needs a key from the SwitchBot app under Profiles > Preferences > About > Developer Options; it also lists the Evaporative Humidifier. Documented limits on that route: SwitchBot caps it at '10,000 requests per day', and accepts only one notification address.[5][6][26][27][35][36]
Platform documentation:
us.switch-bot.com · checked 2026-10-08
csa-iot.org · checked 2026-10-08
Apple Home — Matter path · checked 2026-09-04
Google Home — Matter path · checked 2026-10-03
Alexa — Matter path · checked 2026-09-04
us.switch-bot.com · checked 2026-10-07
SmartThings — Matter path · checked 2026-10-07
home-assistant.io · checked 2026-10-08
home-assistant.io · checked 2026-10-08
Apple Home — Matter path · checked 2026-10-03
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
SmartThings — Matter path · checked 2026-10-14
Listed device functions are established from vendor documentation. An ability missing here is unestablished, not necessarily absent.
| Ecosystem | Support | The catch |
|---|---|---|
| Apple Home | Works, except fan modeWorks, except fan mode — see the catch[2][3][4][32][33] | Apple Home can add it over Matter: SwitchBot names Apple Home in its Matter sentence and certifies this humidifier for Matter as a fan. Apple's list of what the Home app supports over Matter covers On/off and leaves out fan control, so Fan mode is missing in Apple Home. The humidity target does not travel over Matter either and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub. |
| Amazon Alexa | WorksWorks with this ecosystem[2][3][4][32][33] | Alexa adds it over Matter: SwitchBot names Alexa in its Matter sentence and certifies this humidifier for Matter as a fan, and Amazon lists fans among the Matter devices Alexa supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.In Amazon Alexa you also need: a Matter-capable Amazon Echo or eero device — Alexa’s rule for every Matter accessory. Source (read 2026-09-11) |
| Google Home | WorksWorks with this ecosystem[2][3][4][32][33] | Google Home adds it over Matter: SwitchBot names Google Home in its Matter sentence and certifies this humidifier for Matter as a fan, and Google lists fans among the Matter devices it supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's footnote says Matter support needs a SwitchBot Hub.In Google Home you also need: a hub for Google Home (a Nest speaker or display, Nest Wifi Pro, the Google TV Streamer, or a compatible TV) — Google Home’s rule for every Matter accessory. Source (read 2026-09-11) |
| SmartThings | WorksWorks with this ecosystem[2][30] | SmartThings adds it over Matter: SwitchBot certifies this humidifier for Matter as a fan, and Samsung lists fans among the Matter devices SmartThings supports, so On/off and Fan mode work. The humidity target does not travel over Matter and stays in SwitchBot's app. SwitchBot's Matter sentence names Alexa, Apple Home, Google Home and Home Assistant but not SmartThings, and its footnote says Matter support needs a SwitchBot Hub.In SmartThings you also need: a Matter-compatible SmartThings hub — SmartThings’s rule for every Matter accessory. Source (read 2026-10-14) |
| Home Assistant | WorksWorks with this ecosystem[5][6][26][27][35][36] | The fullest control you can get over this machine, and the one that shows exactly what Matter is costing everyone else. Home Assistant ships two official integrations covering it. The Bluetooth one is rated Gold, runs entirely on your own network — Home Assistant states it 'connects locally to the devices without going via the SwitchBot Cloud' — and lists the Evaporative Humidifier as supported with on/off, mode, AND humidity settings. Home Assistant adds that some of its modes only work once a SwitchBot temperature and humidity sensor is bound to it. That last item is the whole story: the local Bluetooth path gives you the humidity control that the Matter path structurally cannot, because Matter sees this machine as a fan. A Home Assistant user therefore gets MORE control of this humidifier than an Apple Home, Alexa or Google Home user does, with no SwitchBot account at all. The other integration works through SwitchBot's servers and needs a key from the SwitchBot app under Profiles > Preferences > About > Developer Options; it also lists the Evaporative Humidifier. Documented limits on that route: SwitchBot caps it at '10,000 requests per day', and accepts only one notification address. |
✓ Works without a subscription: Yes.
Vendor account required: Not established — we have not sourced this yet.
No subscription, and no paywall of any kind was found on any surface read for this record — no plan page, no premium tier, no gated feature. Recorded as an absence rather than as a positive 'none', because SwitchBot nowhere states in writing that the app is free, the way Levoit does on the neighbouring record in this tranche. The only recurring cost is the replacement filter, which SwitchBot sells outright at $29.99 for two.
Start with the thing no vendor in this category will tell you: there is no such thing as a Matter humidifier. Matter has no humidifier device type — it did not gain one when Air Purifier, Air Quality Sensor and Fan all arrived in Matter 1.2, and it still has none through Matter 1.6. So when a humidifier certifies for Matter, it certifies as something else, and this machine's own certificate shows exactly what: CSA254E0MAT46130-24, Matter 1.4, primary device type 0x002B — Fan. The consequence is concrete. Connect this to Alexa or Google Home and you get a fan: on, off, and a speed. Apple's list of what the Home app supports over Matter covers on and off and leaves out fan control, so Apple Home gets less still. You do not get a humidity target, a current-humidity reading, or tank status, because the device class it presents as has nowhere to put them. And SwitchBot's own page, one sentence away from its Matter claim, says the machine 'lets you maintain ideal humidity levels using just your voice or the app' — which is true of the app and not true of the Matter route. This is not a SwitchBot failing so much as a standards gap that SwitchBot's marketing declines to mention, and the proof sits in one company's own filings: its air purifier certifies as 0x002D, a real Air Purifier device type, while its humidifier has to dress as a fan. Second, the vendor contradicts itself about hubs and you should plan for the worse answer. The headline says 'Matter-enabled for direct control through Alexa, Apple Home (HomeKit), Google Home and Home Assistant'. The footnote on the same page says '(*Matter support requires SwitchBot Hub)'. The certificate says the transport is Wi-Fi and Bluetooth, which is the profile of a device that needs no bridge. Two of those three point at direct commissioning and the vendor's most specific statement points at a hub purchase, so budget for the hub. Third, and it inverts the usual order: Home Assistant gets MORE out of this machine than any of the big three ecosystems. Its official Bluetooth integration is Gold-rated, runs locally without SwitchBot's cloud, and exposes on/off, mode and humidity settings — the humidity control that Matter cannot carry. Fourth, a separate hub dependency that is not in dispute: Auto Mode, the set-and-forget humidity-holding mode, requires a SwitchBot Meter or Hub by the vendor's own footnote. Finally the ordinary specifications: 4.5-litre tank, up to 750ml an hour, 18dB in Sleep Mode, ordinary tap water with no distilled water needed, and a washable filter at $29.99 for two — though how often you replace them is not published.
The clearest recommendation here is for a Home Assistant household, and unusually it is not a consolation prize — the official Bluetooth integration is Gold-rated, runs locally with no cloud account, and gives you humidity control that Apple Home, Alexa and Google Home users cannot get through Matter at all. It also suits an existing SwitchBot household, where Auto Mode can lean on a SwitchBot Meter you already own to hold a humidity level automatically. As an appliance it suits anyone who has been irritated by ultrasonic humidifiers: evaporative means no visible mist and no white mineral dust, and SwitchBot states plainly that ordinary tap water is fine. Think carefully if you are buying it to control by voice or from the Home app. It will appear there — as a fan. You will be able to turn it on and off, and change the speed on Alexa or Google Home (Apple's Matter list leaves fan control out), and you will not be able to say 'set humidity to 45%', because Matter has no humidifier device type for the machine to present as. If humidity-by-voice is the reason you are buying, the honest answer is that the feature lives in SwitchBot's own app and its Auto Mode, not in your ecosystem. And budget for a SwitchBot Hub: the vendor's own footnote says Matter support requires one, even though the same page advertises direct control.
This opens SwitchBot's own website. We earn nothing from this link.
Numbered sources below back the facts marked with the matching number above. This is a research profile: compiled from manufacturer documentation, certification registries, and published testing — we state facts, not verdicts, and we have not physically tested this unit. How we work →
Where two sources we consider reliable say different things, we publish both positions and what we recorded, rather than quietly picking one.
Product identity, Price, Market availability, Batteries, Works without the internet, Subscription, Protocols, Required hub or bridge, Power source, Installation, Capabilities, Apple Home compatibility, Amazon Alexa compatibility, Google Home compatibility, SmartThings compatibility, Research status
We publish: unknown
Two first-party statements on one page contradict each other, and the registry sides with the more generous one — which is exactly the shape this catalogue refuses to resolve on its own. Recorded as unresolved rather than decided: hubRequired states all three positions in full and advises a buyer to BUDGET for the hub, because the footnote is the vendor's most specific statement and needing a hub you did not buy is the costlier way to be wrong. That is guidance about risk, not a finding about the product, and the distinction is deliberate. hubs.required stays false and the hub is listed as optional, because converting a contradiction into a stated requirement would assert something no source says. Escalated rather than silently picked, per this catalogue's rule that conflicting sources are a discovery trigger and never an automatic correction. What would settle it: a SwitchBot setup guide naming the commissioning path, or a first-party specification row stating the Matter requirement plainly.
Compatibility and lifecycle information reflects the last-verified date above and can change without notice (firmware updates, cloud-service changes, discontinuations). It is provided as-is, for information — verify with the manufacturer before purchasing. Spot an error? Tell us and we'll fix it. Full terms: Terms of Service.
Your platform, exact hub and the functions you need determine the answer. A Setup Check researches how they fit together.