Research profile · verified 2026-10-16 · sources re-checked 2026-11-16
LIFX SuperColor Smart Light 1-Pack (1100 Lumens)
Compiled by SmartHomeWorkflow Research · LIFX · Smart Lighting · ~$24.98 (price at time of research (2026-10-03), read from LIFX's own US store for the Matter single-pack at $24.98 with no compare-at price. The older HomeKit single-pack on the same page, a different bulb, was on clearance that day at $17.50 against $34.99.)
⚠ Similar names, different products: One product page, two generations, and the variant picker is what decides which one ships. LIFX sells this bulb as "1-Pack (Matter)" at full price and, on the same page, an older "1-Pack (HomeKit)" at a clearance price, plus a 4-pack of the same older bulb. This record is the Matter version, model LHLA19E26CAN. The HomeKit version is a separate, earlier product that LIFX also still lists on its own page. Separately, LIFX runs two lines that share the word Smart Light: SuperColor is the current colour range, and Everyday is a cheaper colour range LIFX describes as less saturated.
Choose a platform above for its connection. A hub can be optional for the device itself and required for a platform or automation.
No hub or bridge. The bulb joins your home Wi-Fi directly and LIFX says setup takes a couple of minutes from the app. One qualifier that only applies to the Matter route: if you add the bulb to Apple Home, Google Home, Amazon Alexa or SmartThings as a Matter device rather than through LIFX's cloud connection, that platform needs a Matter controller of its own — an Echo, a Nest speaker or display, for Apple Home an iPhone on iOS 18 or later (a HomePod, HomePod mini or Apple TV for control away from home and automations), or a SmartThings hub. LIFX also states its cloud connection works for every LIFX product with no hub at all, so the hubless path stays open either way.[4][10][15][16][21][26][27][31][36][37]
Apple Home · Works
Two ways to use it with Apple Home
Both use Matter over your home Wi-Fi. Choose the setup that fits how you want to control it.
No home hub
Control it while you’re home
Use your existing Wi-Fi and iPhone.
Light bulbMatter over Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Wi-Fi
Apple HomeiPhone · iOS 18 or later
What you gainControl it in the Home app without adding a HomePod or Apple TV.
Home hub added
Control it when you’re away, too
Add a home hub that stays connected at home.
Light bulbMatter over Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Local network
Apple home hubHomePod or Apple TV
→Internet
Apple HomeYour phone, away
What you gainThe home hub adds remote access and shared control.
Keep in mindA home hub provides Apple Home’s automation support. The functions a routine can use still depend on this device and connection; check the function table below.
Do I need a Thread border router?
No, for this connection. This device uses Wi-Fi. A HomePod or Apple TV here serves as an Apple home hub; Thread support is a separate role used by Thread devices.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
With an iPhone running iOS 18 or later, you can add and control this accessory in the Home app without a home hub. Apple documentation · checked 2026-10-13
A home hub adds automations, shared control and control while you’re away. Apple documentation · checked 2026-10-13
This version of the bulb reaches Apple Home over Matter. LIFX states no dedicated controller is required on iOS 18 or later, with a home hub optional but recommended — which is the usual Apple qualifier: without a HomePod or Apple TV acting as a home hub, automations and control from outside the house do not run. The older HomeKit version of this bulb, sold on the same page, joins Apple Home the pre-Matter way instead.[4][10][21][31]
Google Home · Works
Two ways to connect to Google Home
The account-linked connection and the Matter connection need different equipment.
No extra hub
Link your LIFX account
Use LIFX’s cloud connection.
Light bulbConnected to Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Internet
LIFX cloudLink your LIFX account
→Account link
Google HomePlatform app
What you gainUse the documented platform connection without adding a Matter controller.
Keep in mindThis route depends on the internet and LIFX’s cloud service.
Controller needed
Add it through Matter
Pair with a Matter controller for your platform.
Light bulbMatter over Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Local network
Google Home controllerMatter-enabled
→Control
Google HomePlatform app
What you gainThe Matter connection talks to the bulb over your home network.
Keep in mindUse a Matter-enabled controller for the chosen platform. Functions and automation availability must be checked for this route; the current function table describes the recorded account-linked connection.
Does this need Thread?
No. This version of the bulb uses Matter over Wi-Fi. The extra hardware serves as a Matter controller, not as a Thread border router.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Same two routes as Alexa. LIFX's cloud connection covers every LIFX product with no hub required and depends on internet; the Matter route needs a Google Matter-enabled controller such as a Nest speaker or display, and then runs over your home network.[4][10][21][31]
Amazon Alexa · Works
Two ways to connect to Amazon Alexa
The account-linked connection and the Matter connection need different equipment.
No extra hub
Link your LIFX account
Use LIFX’s cloud connection.
Light bulbConnected to Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Internet
LIFX cloudLink your LIFX account
→Account link
Amazon AlexaPlatform app
What you gainUse the documented platform connection without adding a Matter controller.
Keep in mindThis route depends on the internet and LIFX’s cloud service.
Controller needed
Add it through Matter
Pair with a Matter controller for your platform.
Light bulbMatter over Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Local network
Amazon Alexa controllerMatter-enabled
→Control
Amazon AlexaPlatform app
What you gainThe Matter connection talks to the bulb over your home network.
Keep in mindUse a Matter-enabled controller for the chosen platform. Functions and automation availability must be checked for this route; the current function table describes the recorded account-linked connection.
Does this need Thread?
No. This version of the bulb uses Matter over Wi-Fi. The extra hardware serves as a Matter controller, not as a Thread border router.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Two ways in, and they behave differently. LIFX's own connection links your LIFX account to Alexa and works for every LIFX product with no hub — that is the route recorded here, and it runs through LIFX's cloud, so it needs internet. The alternative is adding the bulb to Alexa as a Matter device, which LIFX says requires an Amazon Matter-enabled controller such as a recent Echo but then talks to the bulb over your own network.[4][10][21][31]
SmartThings · Works
Two ways to connect to SmartThings
The account-linked connection and the Matter connection need different equipment.
No extra hub
Link your LIFX account
Use LIFX’s cloud connection.
Light bulbConnected to Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Internet
LIFX cloudLink your LIFX account
→Account link
SmartThingsPlatform app
What you gainUse the documented platform connection without adding a Matter controller.
Keep in mindThis route depends on the internet and LIFX’s cloud service.
Controller needed
Add it through Matter
Pair with a Matter controller for your platform.
Light bulbMatter over Wi-Fi
→Wi-Fi
Wi-Fi routerYour home network
→Local network
SmartThings controllerMatter-enabled
→Control
SmartThingsPlatform app
What you gainThe Matter connection talks to the bulb over your home network.
Keep in mindUse a Matter-enabled controller for the chosen platform. Functions and automation availability must be checked for this route; the current function table describes the recorded account-linked connection.
Does this need Thread?
No. This version of the bulb uses Matter over Wi-Fi. The extra hardware serves as a Matter controller, not as a Thread border router.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
LIFX's account-linking route puts the lights in SmartThings with no hub, through LIFX's cloud. The Matter route instead needs a SmartThings Matter-enabled controller. Samsung Galaxy owners get one extra: LIFX documents a SmartThings Music Sync feature that is only available on Galaxy phones.[4][10][21][31]
Home Assistant · Works
How it connects to Home Assistant
Follow the documented setup. Read the equipment details and connection limits below.
What you gainReach the device through its documented local network integration.
Keep in mindRead the setup notes for required credentials, firmware, pairing and supported functions. Local communication does not establish every function or remote access.
Which features come through?
Check the function table and setup notes for this route. An alternative connection does not inherit every capability of the recorded primary connection. A Thread border router, a Matter controller and a platform home hub are different roles; suitable hardware may provide more than one.
These paths summarize documented setup options. Check the function table for the connection covered by each recorded capability.
Home Assistant ships a LIFX integration that finds the bulbs on your network by itself, with no account linking and no cloud in the path. It covers colour, brightness and white temperature, adds identify and restart buttons and a Wi-Fi signal-strength sensor that starts switched off, and runs Home Assistant's own colour-loop and pulse effects. The built-in LIFX effects it lists, such as Flame, Morph and Move, are for other LIFX lights, not this bulb. It is Home Assistant's work, not LIFX's, so it is Home Assistant that keeps it running.[5][11][22][32]
Equipment that adds features
Check which features need it
Matter controller
Only needed if you pair the bulb into a platform over Matter instead of through LIFX's cloud connection. LIFX's Alexa, Google Home and SmartThings instructions each offer both routes and say the Matter route needs that platform's own Matter-enabled controller, while the cloud route needs none. Setting the bulb up this way is also the route that avoids a LIFX account entirely: LIFX says the pairing code in the box adds it straight to Apple Home, Google Home, Alexa or SmartThings.[4][10][15][16][21][26][27][31][36][37]
One device can provide more than one role. These are setup requirements, not a shopping list of separate purchases.
What could you do with this?
Put its functions to use.
Research, not hands-on testing
Start with a documented control or event. The selected connection shows what is confirmed for that platform.
We have not established a control or event to illustrate for this product. Check the connection and equipment information above.
Device actions and events have not been established from the documentation.
Device actions and events have not been established from the documentation.
Device actions and events have not been established from the documentation.
Device actions and events have not been established from the documentation.
Device actions and events have not been established from the documentation.
A documented control or event is one part of a setup. It does not by itself establish a complete automation.
The functions, side by side
What can you use, and where?
A platform connection does not confirm every function. Controls and reported events are shown separately from what an automation can use.
Controls
Not established from vendor documentation
Reported events
Not established from vendor documentation
Individual function comparisons are not available. The control and event summaries above distinguish an unanswered question from a documented absence.
Listed device functions are established from vendor documentation. An ability missing here is unestablished, not necessarily absent.
Two ways in, and they behave differently. LIFX's own connection links your LIFX account to Alexa and works for every LIFX product with no hub — that is the route recorded here, and it runs through LIFX's cloud, so it needs internet. The alternative is adding the bulb to Alexa as a Matter device, which LIFX says requires an Amazon Matter-enabled controller such as a recent Echo but then talks to the bulb over your own network.
Same two routes as Alexa. LIFX's cloud connection covers every LIFX product with no hub required and depends on internet; the Matter route needs a Google Matter-enabled controller such as a Nest speaker or display, and then runs over your home network.
This version of the bulb reaches Apple Home over Matter. LIFX states no dedicated controller is required on iOS 18 or later, with a home hub optional but recommended — which is the usual Apple qualifier: without a HomePod or Apple TV acting as a home hub, automations and control from outside the house do not run. The older HomeKit version of this bulb, sold on the same page, joins Apple Home the pre-Matter way instead.
LIFX's account-linking route puts the lights in SmartThings with no hub, through LIFX's cloud. The Matter route instead needs a SmartThings Matter-enabled controller. Samsung Galaxy owners get one extra: LIFX documents a SmartThings Music Sync feature that is only available on Galaxy phones.
Home Assistant ships a LIFX integration that finds the bulbs on your network by itself, with no account linking and no cloud in the path. It covers colour, brightness and white temperature, adds identify and restart buttons and a Wi-Fi signal-strength sensor that starts switched off, and runs Home Assistant's own colour-loop and pulse effects. The built-in LIFX effects it lists, such as Flame, Morph and Move, are for other LIFX lights, not this bulb. It is Home Assistant's work, not LIFX's, so it is Home Assistant that keeps it running.
Vendor account required: Optional — there is a documented way to use it without one.[6][9][18][28]
On Apple Home via Matter: No — no vendor account is involved.[38]
No plan and no device limit. LIFX states the app "supports unlimited devices on a single account with no per-device or per-location fees", and that its platform connections are "all included at no extra cost".
Maintenance and offline use
Works without the internet: Partly — some of it keeps working and some of it does not. See the detail below.[6][12][19][29]
Standard E26 screw fitting at 120-240V, so it goes where an ordinary bulb goes. LIFX rates it 1100 lumens, roughly a 75W incandescent, 1500K to 9000K white range, colour rendering index 82, 11.5W in use and 0.2W on standby. Firmware arrives through the LIFX app. Two-year hardware warranty. If the bulb is on a wall switch, cutting power at the switch takes it off the network like any Wi-Fi bulb.
Security updates: LIFX states its security-update commitment for this model as a period rather than a date: a minimum of 5 years from the end of manufacturing of each hardware generation (declared worldwide — the document says it applies everywhere). That is a floor measured from a starting point the manufacturer sets — a launch or a purchase — rather than a fixed end date, so it cannot be placed on a calendar here. We record the commitment as the manufacturer states it, in our words, rather than converting it into a date it did not give. This is a published commitment, not a gap in our research.[7][13][20][30]
Who it's for
For someone who wants full-colour light in an ordinary lamp socket with nothing extra to buy, plug in or wire — screw it in, and it is on your Wi-Fi. It suits a handful of lamps in rooms you actually sit in rather than a whole-house retrofit, because each bulb is its own Wi-Fi client on the 2.4GHz band. Home Assistant owners get the most out of it, since the local integration reaches effects and signal data the voice platforms never see. Look elsewhere if your network is 5GHz-only in the rooms that matter, or if you want the lights to keep answering voice commands when the internet is down.
This opens LIFX's own website. We earn nothing from this link.
Sources & method
Numbered sources below back the facts marked with the matching number above. This is a research profile: compiled from manufacturer documentation, certification registries, and published testing — we state facts, not verdicts, and we have not physically tested this unit. How we work →
39 numbered sources· read them in the source's own words
[38] Record-keeping entry: carried from this record's 2026-10-16 read of LIFX's US product page for the SuperColor Smart Light 1-Pack, no new read. Verbatim: 'Do I need a hub or bridge to set it up? No. It's Wi-Fi only. Screw it in, then connect via the LIFX app, or scan the QR code for instant pairing with Apple Home, Google Home, Alexa, or SmartThings.' and 'What's Matter, and does this bulb support it? Yes. It's Matter compatible, connecting seamlessly to Apple Home, Google Home, and SmartThings without needing a separate hub.', verified 2026-10-16
Compatibility and lifecycle information reflects the last-verified date above and can change without notice (firmware updates, cloud-service changes, discontinuations). It is provided as-is, for information — verify with the manufacturer before purchasing. Spot an error? Tell us and we'll fix it. Full terms: Terms of Service.
Check LIFX SuperColor Smart Light 1-Pack (1100 Lumens) with your setup.
Your platform, exact hub and the functions you need determine the answer. A Setup Check researches how they fit together.